Asus gpu tweak target temp9/23/2023 ![]() After testing we found that we really didn’t even need to set it that high, 55-60% would be more than sufficient. BTW, we did all this with a forced fan speed of only 70%. It is 14GHz by default, but we were able to take it to 15.9GHz, which is higher than what we achieved on the Founders Edition at 15.8GHz. We were also impressed by how high we could overclock the memory. We’ll show the exact frequency below in a graph. This overclock is higher than what we found was achieved on the Founders Edition video card. Adding voltage remember, just takes away from the overall board power and you hit the TDP wall much quicker. We were surprised how much headroom the GPU had still even without voltage applied. A game here or there might be unstable at 1980MHz without voltage, but dropping to 1970MHz and raising voltage fixes that. Another option was to lower it to 1970MHz and raise the voltage to the max if instability ever occurred. However, it was on the edge of being stable but did provide consistent frequency. Without overvolting, we managed 1980MHz GPU Boost. This application is supported with unlocked processors. We found that overall raising the GPU Voltage did not help us to overclock more. The Intel Extreme Tuning Utility (Intel XTU) is used to overclock, monitor, and stress a system. In addition, we have the memory set to +1898 or 15,900MHz which is 15.9GHz. We have the power target at 125 and we found that we could set the GPU Boost Clock up to +75 or 1980MHz. You can raise its value to the maximum since it has no direct implication with the voltage or frequencies beyond a certain consumption limitation.You will see ASUS GPU Tweak II above with the highest overclock we found on the ASUS ROG STRIX RTX 2070 SUPER O8G GAMING video card.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |